A Guide to Jump Start your Batteries

Car owners and drivers must know the exact and effective process to jump-start the car. This is useful when the vehicle has a flat battery. The Traction Battery Pack is essential for the procedure. Without jump-starting, it is not possible to turn on the car and make it move. There are several ways of jump-starting the car, but you will know about the best and easiest process to carry out the process in this article. Remember that without a proper setup and mechanism, the process might damage both cars. Here are some essential steps that you must follow:

Steps to Follow to Jump-Start the Batteries
In this section, practical steps are provided to render a perfect piece of knowledge on jump-starting a car. Before knowing the steps, check out the essential needs to jump-start.

• A pair of jump leads.
• Another car or vehicle with a fully charged battery.

Now, the steps are:
Lining up the cars– Park the car in a head-to-head or such a position so that both batteries are easily accessible to start the process of a jump start. Individuals must also keep applying the hand brake so that the car stays in a fixed position and does not roll down. Check the Power Inverter.

Connect the Jump Ends– There are two ends of the jump wire with a definite color. Connect the red jump lead to the car battery that is working perfectly, in a similar manner; affix the other jump end that is mainly black to the Battery that needs to jump-start. Also, inspect the Controller.

Remember that the red jump end is a positive (+) terminal, and you must connect with the positive (+) end of the dead Battery. The black end marks the negative end and connects it with the negative (-) end of the dead Battery. If you alternate it, the Battery will suffer a cross-connection, and the entire electronic of the car will be damaged. Examine the Electric Traction Motor.

Ignite the other car– After connecting the ends properly, start the car with the working battery and leave it for 2 minutes. Remember that you need to wait for at least 3 minutes after connecting the jump ends because a certain start might damage the Battery further. The DC/DC Converter is optimum and thus, check it.

Start the car with a dead Battery– Now, you need to start your car or the car with a flat battery. Leave the vehicles for 10 minutes and at a fast pace. During this time, you need to check whether both cars are ignited. Sometimes due to specific reasons, the vehicle with a flat battery turns off. Check whether the current Transmission is taking place.

Turn off the cars and disconnect– Check whether the Thermal System –Cooling is working or not. You also need to check the Charge Port.

If you are looking for branded car batteries, Car Battery Qatar is the wisest option. You can also Google Car batteries near me to find the best place for your car service.